Pompom Bunny Hangup

Pompom Easter Bunny!
by Twila Lenoir

Hang in There Bunny

Supplies:
2-2 inch white pompoms
2- small tan or grey pompoms
1-medium white pompom
1-tiny red pompom
9- tiny pink pompoms
1- white bumpy chenille ste1- pink plain chenille stem
7mm goggle eyes
Scrap piece of white felt
small grapevine wreath

Instructions:
1. You may have to enlarge the pattern for the bunny's feet and hands. Print and cut out the pattern pieces, then trace them onto white felt. Cut out two feet and two hands.

2. Cut the bumpy chenille stem so that there are two bumps on the stem. Fold the stem in half so that the two bumps are together and the folded part of the stem is at the top. Cut a piece of the pink chenille stem, about the length of the bumpy stem. Glue in the center of the two bumpy stem ears. Make another to complete the two ears.

3. On the 2 inch pompom, which is the bunny's head, glue the two tan or grey pompoms, placing them together for the cheeks. You can also use white, but I thought that it would be hard to see.

4. Glue the tiny pink pompom on top of the two tan pompoms, then add a tiny red pompom for the tongue.

5. Glue the eyes in place above the nose.

6. Glue the two ears on top of the 2 inch pompom and now glue the head to the bottom inside area of the wreath. You will also need to glue the ears to the wreath because the bunny's head is a little top heavy.

7. Glue the other 2 inch pompom on the bottom of the wreath. Glue the medium white pompom to the back of the bottom 2 inch pompom for his tail.

8. Now glue the two hands on the wreath next to the head and the body. 9. Glue the tiny pink pompoms onto the felt feet, three for the toes and one for the heel. Do the same for the other foot and glue them to the body, as shown in the picture.

9. It's hard to see in the picture, but I made a thin ribbon bow and attached it to the top of the wreath with a loop for hanging.